High Performance Machining Center
| V7L | ||
|---|---|---|
| Control System | Siemens | Fanuc |
| Table | ||
| Table Size | 900 x 420 mm （35.43” × 16.54”） | 900 x 420 mm （35.43” × 16.54”） |
| T slot [width x distance x number] | 14 mm × 125 mm × 3 (0.55” × 4.92” × 3) | 14 mm × 125 mm × 3 (0.55” × 4.92” × 3) |
| Max. load | 500 kg (1,103 lb) | 500 kg (1,103 lb) |
| Travel | ||
| X/Y/Z travel | 760 / 450 / 520 mm (29.92” / 17.72” / 20.47”) | 760 / 450 / 520 mm (29.92” / 17.72” / 20.47”) |
| X/Y/Z rapid feedrate | 48 m/min | 48 m/min |
| Spindle nose to table | 100 ~ 620 mm (3.94” ~ 24.41”) | 100 ~ 620 mm (3.94” ~ 24.41”) |
| Spindle | ||
| Spindle Taper | SK40 / BT40 / CAT40 | SK40 / BT40 / CAT40 |
| Spindle motor power | 9 / 22 kW | 7.5 / 15 kW |
| Spindle motor torque | 63 / 135 Nm | 35.8 / 95.5 Nm |
| Spindle speed | 10,000 rpm | 10,000 rpm |
| Tool Changer | ||
| Capacity | DT24 pockets | DT24 pockets |
| Tool diameter | Ø78 / Ø125 mm (Ø3.07” / Ø4.92”) | Ø78 / Ø125 mm (Ø3.07” / Ø4.92”) |
| Tool length | 300 mm (11.81”) | 300 mm (11.81”) |
| Tool weight | 8 kg (17.64 lb) | 8 kg (17.64 lb) |
| Dimension & Weight | ||
| Dimension | 3,250 x 2,710 x 2,900 mm (127.95” × 106.69” × 114.17”) | 3,250 x 2,710 x 2,900 mm (127.95” × 106.69” × 114.17”) |
| Weight | 4,500 kg (9,920 lb) | 4,500 kg (9,920 lb) |
V7L-01
V7L-02