High Performance Machining Center
| V13L | ||
|---|---|---|
| Control System | Siemens / Heidenhain | Fanuc |
| Table | ||
| Table Size | 1,500 x 650 mm (59.06’’ x 25.59’’) | 1,500 x 650 mm (59.06’’ x 25.59’’) |
| T slot [width x distance x number] | 18 mm × 100 mm × 5 (0.71’’ × 3.94’’ × 5) | 18 mm × 100 mm × 5 (0.71’’ × 3.94’’ × 5) |
| Max. load | 1,200 kg (2,646 lbs) | 1,200 kg (2,646 lbs) |
| Travel | ||
| X/Y/Z travel | 1,300 / 650 / 600 mm (51.18’’ / 25.59’’ / 23.62’’) | 1,300 / 650 / 600 mm (51.18’’ / 25.59’’ / 23.62’’) |
| X/Y/Z rapid feedrate | 36 /36 / 24 m/min | 36 / 36 / 24 m/min |
| Spindle nose to table | 150 ~ 750 mm (5.91’’ ~ 29.53’’) | 150 ~ 750 mm (5.91’’ ~ 29.53’’) |
| Spindle | ||
| Spindle Taper | SK40 / BT40 / CAT40 | SK40 / BT40 / CAT40 |
| Spindle motor power | 20 / 53 kW | 18.5 / 11 kW |
| Spindle motor torque | 126 / 250 Nm | 52.5 / 118 Nm |
| Spindle speed | 10,000 rpm | 10,000 rpm |
| Tool Changer | ||
| Capacity | DT24 pockets | DT24 pockets |
| Tool diameter | Ø78 / Ø125 mm (Ø3.07’’ / Ø4.92’’) | Ø78 / Ø125 mm (Ø3.07’’ / Ø4.92’’) |
| Tool length | 300 mm (11.81’’) | 300 mm (11.81’’) |
| Tool weight | 8 kg (17.64 lbs) | 8 kg (17.64 lbs) |
| Dimension & Weight | ||
| Dimension | 4,025 x 3,090 x 3,185 mm (158.46’’ × 121.65’’ × 125.39’’) | 4,025 x 3,090 x 3,185 mm (158.46’’ × 121.65’’ × 125.39’’) |
| Weight | 8,000 kg (17,637 lbs) | 8,000 kg (17,637 lbs) |