V11L
V11L

High Performance Machining Center

  • Fully enclosed tool magazine cover and full enclosure protection for the machine
  • More efficient chip removal system
  • Optimized coolant tank structure design for better filtration and easier maintenance
  • Optimized pipeline installation with drag chain to extend the lifetime
Brochure
Coming Soon
V11L
Control System Siemens / Heidenhain Fanuc
Table
Table Size 1,200 x 600 mm (47.24″ x 23.62″) 1,200 x 600 mm (47.24″ x 23.62″)
T slot [width x distance x number] 18 mm × 100 mm × 5 (0.71″ × 3.94″ × 5) 18 mm × 100 mm × 5 (0.71″ × 3.94″ × 5)
Max. load 1,000 kg (2,205 lb) 1,000 kg (2,205 lb)
Travel
X/Y/Z travel 1,100 / 600 / 600 mm (43.31″ / 23.62″ / 23.62″) 1,100 / 600 / 600 mm (43.31″ / 23.62″ / 23.62″)
X/Y/Z rapid feedrate 36 m/min 36 m/min
Spindle nose to table 150 ~ 750 mm (5.91″ ~ 29.53″) 150 ~ 750 mm (5.91″ ~ 29.53″)
Spindle
Spindle Taper SK40 / BT40 / CAT40 SK40 / BT40 / CAT40
Spindle motor power 9 / 22 kW 11 / 18.5 kW
Spindle motor torque 63 / 135 Nm 52.5 / 118 Nm
Spindle speed 12,000 rpm 12,000 rpm
Tool Changer
Capacity DT24 pockets DT24 pockets
Tool diameter Ø78 / Ø125 mm (Ø3.07″ / Ø4.92″) Ø78 / Ø125 mm (Ø3.07″ / Ø4.92″)
Tool length 300 mm (11.81″) 300 mm (11.81″)
Tool weight 8 kg (17.64 lb) 8 kg (17.64 lb)
Dimension & Weight
Dimension 3,845 x 2,320 x 3,120 mm (151.38″ × 91.34″ × 122.83″) 3,845 x 2,320 x 3,120 mm (151.38″ × 91.34″ × 122.83″)
Weight 6,500 kg (14,330 lb) 6,500 kg (14,330 lb)

General Machining

Exhausted Hydropower Exhausted Exhausted Exhausted

Standard Configuration

  • Belt drive spindle BT40/SK40/CAT40 10000rpm_9/22kW_63/135Nm (Siemens & Heidenhain)
  • Belt drive spindle BT40/SK40/CAT40 10000 rpm_11/18.5kW_52.5/118Nm (FANUC)
  • 24 pockets arm type tool changer, BT40/SK40/CAT40
  • Roller type linear guideways on all axis
  • Full enclosed splash guard
  • Telescopic covers for linear axis
  • Chain type chip conveyor
  • Spindle oil cooler
  • Air-condition electrical cabinet
  • Rigid tapping
  • Automatic lubrication system
  • Coolant system
  • Air blast during cutting
  • LED working lamp
  • End of program light
  • Electrical handwheel (MPG)
  • Tool box
  • Leveling bolts and blocks
  • Coolant gun
  • Air gun
  • User manual (mechanical + electrical parts)
  • Ethernet, CF card and USB interface

Optional Configuration

  • Direct-drive spindle BBT40/SK40/CAT40 12000 rpm, 9/22kW, 63/135Nm
  • Direct-drive spindle BBT40/SK40/CAT40 12000 rpm, 11/18.5kW, 52.5/118Nm
  • Direct-drive spindle BBT40/SK40/CAT40 15000 rpm_8.5/33.5kW_63/135Nm（SIEMENS & HEIDENHAIN Control System）
  • Direct drive spindle BBT40/SK40/CAT40 15000 rpm_9/15kW__57.3/119Nm (FANUC)
  • 28 pockets arm type tool changer, BT40/SK40/CAT40
  • 30 pockets arm type tool changer, BT40/SK40/CAT40
  • 40 pockets arm type tool changer, BT40/SK40/CAT40
  • 24 pockets arm type tool changer, BT50/SK50/CAT50
  • Additional rotary 4th axis
  • Additional rotary 4/5th axis
  • Linear scales on X/Y/Z axis
  • CTS Coolant through spindle + ATS
  • Workpiece probe
  • Tool probe
  • Oil mist collector
  • Oil skimmer
  • Extra 200GB SSD program memory (only available on SIEMENS)

Copyright© PRIMINER Werkzeugmaschinen GmbH Version 2.0