CN Tapping Center
| T7 | ||
|---|---|---|
| Control System | Siemens | Fanuc |
| Table | ||
| Table Size | 800 x 420 mm （31.50” × 16.54”） | 800 x 420 mm （31.50” × 16.54”） |
| T slot [width x distance x number] | 14 mm × 125 mm × 3 (0.55” × 4.92” × 0.12”) | 14 mm × 125 mm × 3 (0.55” × 4.92” × 0.12”) |
| Max. load | 250 kg (551.16 lb) | 250 kg (551.16 lb) |
| Travel | ||
| X/Y/Z travel | 700 / 450 / 300 mm (27.56” / 17.72” / 11.81”) | 700 / 450 / 300 mm (27.56” / 17.72” / 11.81”) |
| X/Y/Z rapid feedrate | 48 m/min | 48 m/min |
| Spindle nose to table | 150 ~450 mm (5.91” ~ 17.72”) | 150 ~ 450 mm (5.91” ~ 17.72”) |
| Spindle | ||
| Spindle Taper | BBT30 | BBT30 |
| Spindle motor power | 4.8 / 21 kW | 3.7 / 13 kW |
| Spindle motor torque | 21 / 45 Nm | 23.6 / 82.8 Nm |
| Spindle speed | 12,000 rpm | 12,000 rpm |
| Tool Changer | ||
| Capacity | DT26 pockets | DT26 pockets |
| Tool diameter | Ø60 / Ø80 mm (Ø2.36” / Ø3.15”) | Ø60 / Ø80 mm (Ø2.36” / Ø3.15”) |
| Tool length | 200 mm (7.87”) | 200 mm (7.87”) |
| Tool weight | 2 kg (4.41 lb) | 2 kg (4.41 lb) |
| Dimension & Weight | ||
| Dimension | 2,200 x 2,460 x 2,400 mm (86.61” × 96.85” × 94.49”) | 2,200 x 2,460 x 2,400 mm (86.61” × 96.85” × 94.49”) |
| Weight | 3,700 kg (8,157 lb) | 3,700 kg (8,157 lb) |
